XGODY Universal HardWire Fuse Box Car Recorder Dash Cam Hard Wire Kit Mini USB
Specifications
| Return Shipping Will Be Paid By | Seller |
| All Returns Accepted | Returns Accepted |
| Item Must Be Returned Within | 30 Days |
| Refund Will Be Given As | Money Back |
| Brand | Xgody |
| MPN | NOT APPLY |
| Type | Dash Camera |
Extra AdvantageCompatible with 12-24Vdc for car or truck installations.Perfect for 24/7 Parking Surveillance.Low voltage protection protects against battery dying.Works for almost all car micro USB device, such as dash cam、mirror cam、GPS navigator and radar detectorNo need for cable from car cigarette lighter socket, replace it with a permanent hidden cableLess static when you’re listening to the radio.Installation in minutes with little to no expertise required.3.5 meter power cable included.The micro USB hardwire kit with built-in precise switching power supply module can transform 12V(24V) to 5V. The built-in safeguards protect your devices against overheating.Safety NotesPertorm the installation with the ignition in the OFF position.Do not strip any live wires.Correct electnical polarity and grounding is required for safe and proper installation.Only connect to a negative ground DC supply circuit.Not for installation to positive ground circuits.Technical DetailsConnector: Micro USB ConnectorInput Voltage: DC 12V-24VOutput Voltage: 5VOutput Current: 2AWorking Temperature:-40~ 160 Degree FCable Length: 3.5MLow Voltage Protection: 11.4V for 12V vehicle; 23.5V for 24V vehicleInsert the 2 fuse in the correct positionThe supplied 5 Amp fuse MUST be placed in the uppermost socket, as shown above. In line with the red cable. The original fuse is to replaced in to the lower socket. Failure to do so will change the protection of the original circuit within the vehicle. Whilst this will not cause any damae to the vehicle,the lower 5 Amp fuse may above.Installation InstructionInstallation - Step 1: Connect the supplied "fuse tap cable" to the vehicles fuse box.Installation - Step 2: Installing the "Car Power Cable".2.1 Installation of the camera power cable needs careful planning for the cable run and the final position of the camera within the vehicle.2.2 Starting from the camera end of the cable (with the mini USB) tuck the cable under the vehicle headlining, the "A" post trim and side panel trim until the cable exits towards the footwell.For detals instruction preocess please refer to our user manual in the package.If in any doubt, please ask a vehicle technician prior for help.
